Chemical resistance of HPL
Worktop 60 mm / Profile 0
HPL composite board of leightweight chipboard, decorative side glued with 0.6 mm HPL type P according to EN 438, water resistant backing.
The front edge is cut at an angle, the rear edge is sealed with a protective edge.
Field of application
- Built-in elements with design competence for kitchens and bathrooms, laboratories, medical practices, canteens, catering establishments, industrial and commercial workplaces.
Worktop 60 mm / Profile 0
| Sizes in mm | Thickness in mm | Profile | Textures | ||
|---|---|---|---|---|---|
| Length | Width | single sided | both sides | ||
| 5,500 | 1,200 | 58.6 |
|
|
21 | 22 | 40 | 42 | 47 | 49 |
| 5,500 | 600 | 58.6 |
|
|
21 | 22 | 40 | 42 | 47 | 49 |
| 5,500 | 640 | 58.6 |
|
|
21 | 22 | 40 | 42 | 47 | 49 |
| 5,500 | 900 | 58.6 |
|
|
21 | 22 | 40 | 42 | 47 | 49 |
Core material
- Light weight chipboard
- Weight-reduced, doubled chipboard with fine particle surface.
Density (depending on thickness)
- 550 kg/m³ (EN 323)
Weight per square (depending on thickness)
- env. 30 kg/m²
Formaldehyde emission class
- E1 (EN 120)
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".
Product safety
- The material is not rated as hazardous material.
- The surface is physiologically safe, and approved for direct contact with food.
- This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
Sustainability
- Thermopal wood chipboard is a environmentally friendly wood material. We use approx. 65% wood offcuts from industry, obtained in the processing of round timber, plus industrial wood from forests in the region.
- We are supporting sustainable forestry in line with international standards. Ecological, economical and social criteria are all taken equally into account.
- We support the preservation of wood as a natural resource in the sense of a recycling economy by using approx. 35% of our source material from scrap wood of category A I and A II in accordance with the regulations of the scrap wood ordnance. By recycling these materials, we are also making an important contribution towards binding carbon and reducing hazardous carbon dioxide concentrations in the atmosphere.
Special
- We also offer colour matching HPL edge strips.
- Other textures on request.
- Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
Downloads
Worktop 60 mm / Profile 0
Certificates
Worktop 60 mm / Profile 0
Processing
- Can be worked with carbide tipped tools on conventional woodworking machines.
Edging
- Please moisture-seal the edges.
Installation and assembly
- Sufficient conditioning is required prior to installation. The premises themselves need to be air-conditioned according to future use.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage and handling
- On all level surfaces (e.g. pallets), in dry, vented rooms.
Disposal
- We recommend material recycling or energy recovery.
Downloads
General working recommendations for edging materials made from thermosetting resins
2.17 MB | Download
