Decor-Span type P2 / Melamine Faced Boards / Wood products / Products / Home / Thermopal

Notepad

Note

DESIGNERS' COLLECTION

Designs by creatives for creatives.

more >

SALES PARTNERS

Distributor search

Thermopal distributors close to you

more >

DST

The DST system by Thermopal:

Design - Surface - Core Technology

more >

Register for the Thermopal Newsletter

Go to registration.

more >

Product description

Technical information

Documents

Processing

References

Decor-Span type P2

Melamine faced chipboard with a fine particle surface chipboard type P2, faced in single or double paper construction.

Field of application

Carcasses and furniture doors for furniture construction, shop- and interior fitting.

Decor-Span type P2

Sizes in mm		Thickness in mm	Textures
Length	Width	Thickness in mm	Textures
2,750	2,050	6.5 \| 7 \| 8 \| 10 \| 12 \| 13 \| 14 \| 15 \| 16 \| 18 \| 19 \| 22 \| 25 \| 28 \| 30 \| 38 \| 40	Top: 01 \| 04 \| 06 \| 07 \| 21 \| 22 \| 23 \| 40 \| 47 \| 49 \| 72 Reverse: 01 \| 04 \| 06 \| 21 \| 22 \| 23 \| 40 \| 47 \| 49 \| 72
3,200	2,050	8 \| 10 \| 13 \| 16 \| 18 \| 19 \| 22 \| 25 \| 30	04 \| 22 \| 47 \| 49
5,500	2,050	8 \| 10 \| 12 \| 13 \| 14 \| 16 \| 18 \| 19 \| 22 \| 25 \| 28 \| 30 \| 40	04 \| 06 \| 21 \| 22 \| 40 \| 47 \| 49 \| 72

Melamine faced chipboard with a fine particle surface chipboard type P2, faced in single or double paper construction.

Product standard

EN 14322

Core material

Chipboard type P2
Wood chipboard with fine particle surface type P2 according to EN 312.

Density (depending on thickness)

590 kg/m³ — 710 kg/m³ ± 10 % (EN 323)

Reaction to fire

normally inflammable
B2 (DIN 4102-1)
D-s2,d0 (EN 13501-1)

EC scope

EN 13986

Formaldehyde emission class

E1 (EN 120)

Chemical resistance

Resistant to organic solvents, weak acids, petrol and oil.

Cleaning and care

The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

The surface is physiologically safe, and approved for direct contact with food.
The material is not rated as hazardous material.
The decorative coating consists of printed or dyed décor papers. They are saturated in the duroplast melamine-formaldehyde resin, which then hardens during the laminating process to form a highly resistant, non-reactive material.
We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.
This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

Sustainability

Thermopal wood chipboard is a environmentally friendly wood material. We use approx. 65% wood offcuts from industry, obtained in the processing of round timber, plus industrial wood from forests in the region.
We are supporting sustainable forestry in line with international standards. Ecological, economical and social criteria are all taken equally into account.
We support the preservation of wood as a natural resource in the sense of a recycling economy by using approx. 35% of our source material from scrap wood of category A I and A II in accordance with the regulations of the scrap wood ordnance. By recycling these materials, we are also making an important contribution towards binding carbon and reducing hazardous carbon dioxide concentrations in the atmosphere.

Special

The colour may differ slightly from HPL with overlay.
Specially with light designs, slight colour variations are possible between single and double paper construction as well compared to high pressure laminates and compact grade laminates. Please let us know if a combination of those material should be required.
If printed designs are required for horizontal applications it is recommended that an overlay is ordered. The colour may differ slightly from HPL without overlay and melamine faced board. / The colour may differ slightly from HPL with overlay.
If printed designs are required for horizontal applications it is recommended that an overlay is ordered. The colour may differ slightly from HPL without overlay and melamine faced board.

Downloads

Technical details

975.84 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

Decor-Span type P2

Certificates

Certificate of compliance: Proove of food harmless

1.08 MB | Download

Fire behaviour acc. to EN 13501-1

569.04 kB | Download

EC Declaration of Conformity

117.44 kB | Download

Decor-Span type P2

Processing

Can be worked with carbide tipped tools on conventional woodworking machines.

Edging

Thick and thin edges are suitable.
EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
Please ensure that the material is processed and fitted correctly and using the best available technology.