Decor-Span type P2 F****

Melamine faced wood chipboard, both sides decorative faced in single- or double paper construction. Because of the absolutely minimised formaldehyde content the limit values of the Blue Angel, EPF- as well as CARB2 standards are respected with this board without any problems.

Field of application

• Toxic substance reduced overall solutions for interior fitting, furnitures in the private as well as object sector, for example in hotels, schools, offices and administration buildings, specially when materials with specially low emission potential is asked for.

Decor-Span type P2 F****

Melamine faced wood chipboard, both sides decorative faced in single- or double paper construction. Because of the absolutely minimised formaldehyde content the limit values of the Blue Angel, EPF- as well as CARB2 standards are respected with this board without any problems.

Product standard

• EN 14322

Core material

• Chipboard Type P2 F****
• Wood particle board type P2 to EN 312 with specially reduced formaldehyde emissions of only 1/3 of the European E1 limit value.

Density (depending on thickness)

• 670 kg/m³ ± 10 % (EN 323)

Reaction to fire

• normally inflammable
• B2 (DIN 4102-1)
• D-s2,d0 (EN 13501-1, CWFT)

EC scope

• EN 13986

Formaldehyde emission class

• F**** (JIS A 1460)

Chemical resistance

• Resistant to organic solvents, weak acids, petrol and oil.

Cleaning and care

• The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

• The surface is physiologically safe, and approved for direct contact with food.
• The decorative coating consists of printed or dyed décor papers. They are saturated in the duroplast melamine-formaldehyde resin, which then hardens during the laminating process to form a highly resistant, non-reactive material.
• We manufacture the panels without the use of halogens, heavy metals, preservatives, wood protectors or organic solvents.
• This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
• The material is not rated as hazardous material.

Sustainability

• Thermopal wood chipboard is a environmentally friendly wood material. We use approx. 65% wood offcuts from industry, obtained in the processing of round timber, plus industrial wood from forests in the region.
• We are supporting sustainable forestry in line with international standards. Ecological, economical and social criteria are all taken equally into account.
• We support the preservation of wood as a natural resource in the sense of a recycling economy by using approx. 35% of our source material from scrap wood of category A I and A II in accordance with the regulations of the scrap wood ordnance. By recycling these materials, we are also making an important contribution towards binding carbon and reducing hazardous carbon dioxide concentrations in the atmosphere.

Special

• The colour may differ slightly from HPL with overlay.
• If required for horizontal applications it is recommended that an overlay is ordered. The colour may differ slightly from HPL without overlay and melamine faced board.

Downloads

Technical details

875.79 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

Decor-Span type P2 F****

Certificates

EC Declaration of Conformity

116.79 kB | Download

Certificate of compliance: Proove of food harmless

1.08 MB | Download

Decor-Span type P2 F****

Processing

• Can be worked with carbide tipped tools on conventional woodworking machines.

Edging

• Thick and thin edges are suitable.
• EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
• Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage and handling

• On all level surfaces (e.g. pallets), in dry, vented rooms.

Disposal

• We recommend material recycling or energy recovery.