Chemical resistance of HPL
MDF black Composite
Composite board made from a black coloured medium density fibre board with a homogeneous structure (MDF), glued on both sides with 0.8 mm HPL and/or metallic HPL. The edges are profilable.
Field of application
- For decorative open-edge solutions, e.g. furniture doors, table tops for the furniture industry, shop and interior fittings, tradefair construction
MDF black Composite
| Sizes in mm | Thickness in mm | Textures | |
|---|---|---|---|
| Length | Width | ||
| 2,750 | 2,020 | 11.6 | 17.6 | 20.6 | 26.6 |
Top: 01 |
04 |
06 |
07 |
21 |
22 |
23 |
40 |
47 |
49 |
72
|
Composite board made from a black coloured medium density fibre board with a homogeneous structure (MDF), glued on both sides with 0.8 mm HPL and/or metallic HPL. The edges are profilable.
Core material
- MDF black
- Black coloured medium density fibre board with a homogeneous structure.
Density (depending on thickness)
- 700 kg/m³ — 780 kg/m³ (EN 323)
Reaction to fire
- normally inflammable
- B2 (DIN 4102-1)
- 11.6 mm: not classified (EN 13501-1)
- 17.6 mm — 26.6 mm: D-s2,d0 (EN 13501-1, CWFT)
EC scope
- EN 438-7
Formaldehyde emission class
- E1 (EN 120)
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".
Product safety
- The surface is physiologically safe, and approved for direct contact with food.
- The material is not rated as hazardous material.
- This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
Special
- Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
- It is recommended to order overlay for horizontal, heavy used surfaces in combination with metallic designs. Slight visual difference to the surface is possible without the overlay.
Downloads
MDF black Composite
Certificates
MDF black Composite
Processing
- Can be worked with carbide tipped tools on conventional woodworking machines.
Edging
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
- All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage and handling
- On all level surfaces (e.g. pallets), in dry, vented rooms.
Disposal
- We recommend material recycling or energy recovery.
Downloads
General working recommendations for edging materials made from thermosetting resins
2.17 MB | Download
