Chipboard Composite type P2 / HPL Composite Boards / Wood products / Products / Home / Thermopal

Notepad

Note

DESIGNERS' COLLECTION

Designs by creatives for creatives.

more >

SALES PARTNERS

Distributor search

Thermopal distributors close to you

more >

DST

The DST system by Thermopal:

Design - Surface - Core Technology

more >

Register for the Thermopal Newsletter

Go to registration.

more >

Product description

Technical information

Documents

Processing

References

Chipboard Composite type P2

Composite board made up from a chipboard core with fine particle surface type P2, glued both sides with 0.8 mm HPL and/or metallic HPL.

Field of application

Kitchen furniture, shop fitting, partition walls, interior fitting in banks, offices, schools, hospitals, laboratories, public buildings, use in shipbuilding and vehicle construction.

Chipboard Composite type P2

Sizes in mm		Thickness in mm	Textures
Length	Width	Thickness in mm	Textures
2,750	2,020	10 \| 12 \| 13.8 \| 14.6 \| 16 \| 16.4 \| 17.6 \| 18.4 \| 19 \| 19.6 \| 20.6 \| 22 \| 23.6 \| 25 \| 26.6 \| 29.6 \| 39.6	Top: 01 \| 04 \| 06 \| 07 \| 21 \| 22 \| 23 \| 40 \| 47 \| 49 \| 72 Reverse: 01 \| 04 \| 06 \| 21 \| 22 \| 23 \| 40 \| 47 \| 49
5,500	2,020	9.4 \| 11.4 \| 13.4 \| 14.6 \| 15.3 \| 16.4 \| 17.6 \| 18.4 \| 19 \| 19.6 \| 20.6 \| 22 \| 23.6 \| 25 \| 26.6 \| 29.6 \| 39.6	Top: 01 \| 04 \| 06 \| 21 \| 22 \| 23 \| 40 \| 47 \| 49 \| 72 Reverse: 01 \| 04 \| 06 \| 21 \| 22 \| 23 \| 40 \| 47 \| 49

Composite board made up from a chipboard core with fine particle surface type P2, glued both sides with 0.8 mm HPL and/or metallic HPL.

Core material

Chipboard type P2
Wood chipboard with fine particle surface type P2 according to EN 312.

Density (depending on thickness)

590 kg/m³ — 700 kg/m³ ± 10 % (EN 323)

Reaction to fire

normally inflammable
9.4 mm — 13.8 mm: not classified (EN 13501-1, CWFT)
14.6 mm — 29.6 mm: D-s2,d0 (EN 13501-1, CWFT)
39.6 mm: not classified (EN 13501-1, CWFT)

EC scope

EN 438-7

Formaldehyde emission class

E1 (EN 120)

Cleaning and care

The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

The surface is physiologically safe, and approved for direct contact with food.
The material is not rated as hazardous material.
This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

Sustainability

Thermopal wood chipboard is a environmentally friendly wood material. We use approx. 65% wood offcuts from industry, obtained in the processing of round timber, plus industrial wood from forests in the region.
We are supporting sustainable forestry in line with international standards. Ecological, economical and social criteria are all taken equally into account.
We support the preservation of wood as a natural resource in the sense of a recycling economy by using approx. 35% of our source material from scrap wood of category A I and A II in accordance with the regulations of the scrap wood ordnance. By recycling these materials, we are also making an important contribution towards binding carbon and reducing hazardous carbon dioxide concentrations in the atmosphere.

Special

Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
It is recommended to order overlay for horizontal, heavy used surfaces in combination with metallic designs. Slight visual difference to the surface is possible without the overlay.

Downloads

Technical details

1,008.26 kB | Download

Chemical resistance of HPL

110.51 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

General Product Data Sheet for HPL Elements

93.51 kB | Download

Chipboard Composite type P2

Certificates

EC Declaration of Conformity

166.45 kB | Download

Certificate of compliance: Proove of food harmless

1.08 MB | Download

Chipboard Composite type P2

Processing

Can be worked with carbide tipped tools on conventional woodworking machines.

Edging

Thick and thin edges are suitable.
EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
Please ensure that the material is processed and fitted correctly and using the best available technology.