Technical details
Chipboard Composite type P2 F****
Composite board made from a wood chibboard, both sides faced with 0,8 mm HPL or Metallic HPL. Because of the absolutely minimised formaldehyde content the limit values of the Blue Angel, EPF- as well as CARB2 standards are respected with this board without any problems.
Field of application
- Toxic substance reduced overall solutions for interior fitting, furnitures in the private as well as object sector, for example in hotels, schools, offices and administration buildings, specially when materials with specially low emission potential and excellent surface quality is asked for.
Chipboard Composite type P2 F****
| Sizes in mm | Thickness in mm | Textures | |
|---|---|---|---|
| Length | Width | ||
| 2,750 | 2,020 | 20.6 |
Top: 01 |
04 |
06 |
07 |
21 |
22 |
23 |
40 |
47 |
49 |
72
|
| 5,500 | 2,750 | 20.6 |
Top: 01 |
04 |
06 |
21 |
22 |
23 |
40 |
47 |
49 |
72
|
Composite board made from a wood chibboard, both sides faced with 0,8 mm HPL or Metallic HPL. Because of the absolutely minimised formaldehyde content the limit values of the Blue Angel, EPF- as well as CARB2 standards are respected with this board without any problems.
Core material
- Chipboard Type P2 F****
- Wood particle board type P2 to EN 312 with specially reduced formaldehyde emissions of only 1/3 of the European E1 limit value.
Density (depending on thickness)
- 670 kg/m³ ± 10 % (EN 323)
Reaction to fire
- normally inflammable
- D-s2,d0 (EN 13501-1, CWFT)
EC scope
- EN 438-7
Formaldehyde emission class
- F**** (JIS A 1460)
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".
Product safety
- The surface is physiologically safe, and approved for direct contact with food.
- The material is not rated as hazardous material.
- This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
Sustainability
- Thermopal wood chipboard is a environmentally friendly wood material. We use approx. 65% wood offcuts from industry, obtained in the processing of round timber, plus industrial wood from forests in the region.
- We are supporting sustainable forestry in line with international standards. Ecological, economical and social criteria are all taken equally into account.
- We support the preservation of wood as a natural resource in the sense of a recycling economy by using approx. 35% of our source material from scrap wood of category A I and A II in accordance with the regulations of the scrap wood ordnance. By recycling these materials, we are also making an important contribution towards binding carbon and reducing hazardous carbon dioxide concentrations in the atmosphere.
Special
- Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
- It is recommended to order overlay for horizontal, heavy used surfaces in combination with metallic designs. Slight visual difference to the surface is possible without the overlay.
Downloads
Chipboard Composite type P2 F****
Certificates
Chipboard Composite type P2 F****
Processing
- Can be worked with carbide tipped tools on conventional woodworking machines.
Edging
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
- All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage and handling
- On all level surfaces (e.g. pallets), in dry, vented rooms.
Disposal
- We recommend material recycling or energy recovery.
Downloads
General working recommendations for edging materials made from thermosetting resins
2.17 MB | Download
