High quality composite with unique surface quietness. Consisting of a wood particle board type P2, both side faced with 1.2 mm HPL respectively metallic HPL.

Composite board made up from a chipboard core with fine particle surface type P2, glued both sides with 0.8 mm HPL and/or metallic HPL.

Composite board made from a wood chibboard, both sides faced with 0,8 mm HPL or Metallic HPL. Because of the absolutely minimised formaldehyde content the limit values of the Blue Angel, EPF- as well as CARB2 standards are respected with this board without any problems.

Composite board made up from a moisture resistant chip board with fine particle surface type P5, glued both sides with 0.8 mm HPL and/or metallic HPL.

Composite board made up from a light weight chipboard, glued both sides with 0.8 mm HPL and/or metallic HPL.

Composite board made from a medium density fibre board with a homogeneous structure (MDF), glued both sides with 0.8 mm HPL and/or metallic HPL. The edges are profilable

Composite board made from a black coloured medium density fibre board with a homogeneous structure (MDF), glued on both sides with 0.8 mm HPL and/or metallic HPL. The edges are profilable.

Poplar plywood AW100 board, glued on both sides with 0.8 mm HPL and/or metallic HPL. For maximum moisture resistance, bending strength and durability.

Birch multiplex AW100 board, glued on both sides with min. 0.8 mm HPL and/or metallic HPL. For maximum moisture resistance, bending strength and durability.

Blockboard, glued on both sides with 0.8 mm HPL and/or metallic HPL. For high demand in bending strength.
Core layer made from a urea glue bonded blockboard (IF 20 according to DIN 68705), faced with a thin particle board.