Magnet Chipboard Composite type P2

Decorative magnetic composite HPL board with 1.2 mm Magnet HPL on both sides.

Field of application

• Furniture construction, interior and shop fitting, trade fair construction, partition walls, offices, museums, public institutions.

Magnet Chipboard Composite type P2

Decorative magnetic composite HPL board with 1.2 mm Magnet HPL on both sides.

Core material

• Chipboard type P2
• Wood chipboard with fine particle surface type P2 according to EN 312.

Density (depending on thickness)

• 595 kg/m³ — 695 kg/m³ ± 10 % (EN 323)

Reaction to fire

• normally inflammable

EC scope

• EN 438-7

Formaldehyde emission class

• E1 (EN 120)

Cleaning and care

• The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

• The material is not rated as hazardous material.
• This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

Sustainability

• Thermopal wood chipboard is a environmentally friendly wood material. We use approx. 65% wood offcuts from industry, obtained in the processing of round timber, plus industrial wood from forests in the region.
• We are supporting sustainable forestry in line with international standards. Ecological, economical and social criteria are all taken equally into account.
• We support the preservation of wood as a natural resource in the sense of a recycling economy by using approx. 35% of our source material from scrap wood of category A I and A II in accordance with the regulations of the scrap wood ordnance. By recycling these materials, we are also making an important contribution towards binding carbon and reducing hazardous carbon dioxide concentrations in the atmosphere.

Special

• Further core boards on request.
• We recommend the use of Uni-designs.
• The colour may differ slightly from HPL with overlay.
• Alu 1, 2 and 4 are not possible.
• Slight deviations in the structure compared with the standard product cannot be avoided because of the metal inserts.
• Full-size boards have a non-magnetic border approx. 2 cm wide.
• Cut to size is not available.

Downloads

Chemical resistance of HPL

110.51 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

Magnet Chipboard Composite type P2

Certificates

EC Declaration of Conformity

176.41 kB | Download

Certificate of compliance: Proove of food harmless

1.08 MB | Download

Magnet Chipboard Composite type P2

Processing

• In general watch out for flying sparks! Switch-off any extraction / vacuum. Single sheet cut with the decorative side facing up. All carbide tipped tools with firmly soldered blades and drawing cut are suitable, do not use diamond tools. Trial cuts are recommended.

Machines and tools

• Machining can be done on all common machining equipment and processing centres.

Edging

• Thick and thin edges are suitable.
• EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
• Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage and handling

• On all level surfaces (e.g. pallets), in dry, vented rooms.

Disposal

• We recommend material recycling or energy recovery.

Downloads

General working recommendations for edging materials made from thermosetting resins

2.17 MB | Download