Chemical resistance of HPL
Plywood super light Composite
Ultra light plywood board, glued on both sides with 0.8 mm HPL and/or metallic HPL. For high demand in bending strength. Middle layer made of Albasia.
Field of application
- For trade fair construction, vehicle construction, exclusive interior fitting where maximum bending strength of the board is required. Library, shop and chemists fitting, the entire office furniture sector, in particular filing cabinets, shelves, display cases, etc.
Plywood super light Composite
| Sizes in mm | Thickness in mm | Textures | |
|---|---|---|---|
| Length | Width | ||
| 5,200 | 2,020 | 17.6 | 20.6 |
Top: 21 |
22 |
23 |
33 |
40 |
47 |
49 |
72
|
| 2,600 | 2,020 | 17.6 | 20.6 |
Top: 21 |
22 |
23 |
33 |
40 |
47 |
49 |
72
|
Ultra light plywood board, glued on both sides with 0.8 mm HPL and/or metallic HPL. For high demand in bending strength. Middle layer made of Albasia.
Core material
- Plywood super-light
- Ultra light blockboard, made of Albasia. The middle layer is wedge-galvanised and faced with a veneer deck.
Density (depending on thickness)
- 300 kg/m³ — 320 kg/m³ ± 10 %
Weight per square (depending on thickness)
- env. 7 kg/m²
Formaldehyde emission class
- E1 (EN 120)
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".
Product safety
- The surface is physiologically safe, and approved for direct contact with food.
- The material is not rated as hazardous material.
- This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
Special
- Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
- It is recommended to order overlay for horizontal, heavy used surfaces in combination with metallic designs. Slight visual difference to the surface is possible without the overlay.
Downloads
Plywood super light Composite
Certificates
Plywood super light Composite
Processing
- Machining can be done on all common machining equipment and processing centres.
Machines and tools
- Carbide tipped tools are suitable for machining and processing.
Edging
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
- All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage and handling
- On all level surfaces (e.g. pallets), in dry, vented rooms.
- Protect from moisture and wet conditions.
Disposal
- Energy recovery is recommended.
Downloads
General working recommendations for edging materials made from thermosetting resins
2.17 MB | Download
