Hemp fibre Composite

Composite board made from a hemp fibre board for highest requirements in eco-balance and sustainability, both sides faced with 0.8 mm HPL or Metallic HPL.

Field of application

• Face quality for furniture and general interior fitting in the object- and exhibition construction, in public buildings as well as ship interior fitting, specially when light material made from fast renewable raw material is desired.

Hemp fibre Composite

Composite board made from a hemp fibre board for highest requirements in eco-balance and sustainability, both sides faced with 0.8 mm HPL or Metallic HPL.

Core material

• Hemp fibre board
• Light chipboard with fine particle surface made from the fast renewable cultivated plant hemp and wood shares.

Density (depending on thickness)

• 480 kg/m³ ± 10 % (EN 323)

Formaldehyde emission class

• E1 (EN 120)

Cleaning and care

• The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

• The surface is physiologically safe, and approved for direct contact with food.
• The material is not rated as hazardous material.
• This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

Special

• Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.

Downloads

Chemical resistance of HPL

110.51 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

Hemp fibre Composite

Certificates

Certificate of compliance: Proove of food harmless

1.08 MB | Download

Hemp fibre Composite

Processing

• Can be worked with carbide tipped tools on conventional woodworking machines.

Edging

• Thick and thin edges are suitable.
• EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
• Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage and handling

• On all level surfaces (e.g. pallets), in dry, vented rooms.

Disposal

• We recommend material recycling or energy recovery.

Downloads

General working recommendations for edging materials made from thermosetting resins

2.17 MB | Download