Individual HPL type S

Decorative high pressure laminate designed with individual motifs in standard quality.
The reverse side is sanded for gluing.

Field of application

• The application possibilities range from shop and fair construction to interior fitting and object business. Individual HPL is unsuitable for permanent outdoor use.

Individual HPL type S

Product standard

• leaned on EN 438-3

Reaction to fire

• normally inflammable
• B2 (DIN 4102-1)

Formaldehyde emission class

• E1 (EN 717-1)

Cleaning and care

• The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

• The surface is physiologically safe, and approved for direct contact with food.
• The material is not rated as hazardous material.
• This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

Special

• Design is created from motif templates (photo, slide, digital image etc.) by printing digital information on special paper and subsequently pressing.
• Motif size in mm: 2.700 x 2.000 (length x width)
• In principle we recommend the sampling of your designs. When they are pressed as Thermopal individual samples you are able to see if the reproduction meets your requirements. On samples we comply with your colour proofs or colour values that are based on popular colour systems such as Pantone or RAL.
• Individual is not suitable for the permanent use outside.

Downloads

Chemical resistance of HPL

110.51 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

Individual HPL type S

Certificates

Certificate of compliance: Proove of food harmless

1.08 MB | Download

Individual HPL type S

Processing

• Please respect the recommendations of the GKV trade associaton for the processing of high pressure laminates.

Installation and assembly

• An 'Individual HPL Backing' is required to produce a composite element.
• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
• Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage and handling

• On all level surfaces (e.g. pallets), in dry, vented rooms.

Disposal

• Energy recovery is recommended.

Downloads

General recommendations for working with decorative laminates

749.93 kB | Download

Gluing Table for High Pressure Laminates (HPL)

523.22 kB | Download

Fabrication and fixing of HPL veneered mineral based core materials

4.05 MB | Download

Bonding and processing HPL on metal surfaces

1.95 MB | Download

Use of Decorative Laminates in wet and damp areas

1.02 MB | Download

Individual HPL type S

Education

Realschule Höchstadt, Germany

New building of the Höchstadt secondary school

more >

Shenfield School, Essex (UK)

more >

Health & Care

Paediatric clinic 3. Orden, München

Creating a harmonic room ambience

more >

Hotel

Hotel Lago, Ulm

Arty designed wall cladding in a wet area produced with Individual motifs

more >

Radisson SAS, Frankfurt

WC partition walls in the Radisson SAS in Frankfurt

more >

Cocoon Club, Frankfurt

WC partition walls of Thermopal Individual HPL in the Cocoon Club Frankfurt

more >

Comfort Hotel MunichOst

Wall fixed head boards

more >

Atlantic Hotel at the racecourse Bremen

Interior fitting of a hotel

more >

Tradefair

Motor show Geneva 2008, trade fair stand company Rinspeed

Trade fair back panel created using Thermopal Individual HPL, motif the underwater vehicle "sQuba"

more >