Individual Chipboard Composite type P2

Composite board made of a chipboard with fine particle surface type P2, designed with individual motifs. In the top side faced with 1.2 mm Individual HPL, white backing on the reverse side.

Field of application

• The product has a wide spectrum of applications, ranging from trade fair and shop fitting to interior finishing. Individual Chipboard Composite is not suitable to outdoor use.

Individual Chipboard Composite type P2

Composite board made of a chipboard with fine particle surface type P2, designed with individual motifs. In the top side faced with 1.2 mm Individual HPL, white backing on the reverse side.

Core material

• Chipboard type P2
• Wood chipboard with fine particle surface type P2 according to EN 312.

Density (depending on thickness)

• 645 kg/m³ — 675 kg/m³ ± 10 % (EN 323)

Reaction to fire

• normally inflammable

Formaldehyde emission class

• E1 (EN 120)

Cleaning and care

• The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

• The material is not rated as hazardous material.
• This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

Sustainability

• Thermopal wood chipboard is a environmentally friendly wood material. We use approx. 65% wood offcuts from industry, obtained in the processing of round timber, plus industrial wood from forests in the region.
• We are supporting sustainable forestry in line with international standards. Ecological, economical and social criteria are all taken equally into account.
• We support the preservation of wood as a natural resource in the sense of a recycling economy by using approx. 35% of our source material from scrap wood of category A I and A II in accordance with the regulations of the scrap wood ordnance. By recycling these materials, we are also making an important contribution towards binding carbon and reducing hazardous carbon dioxide concentrations in the atmosphere.

Special

• Further core boards on request.
• Design is created from motif templates (photo, slide, digital image etc.) by printing digital information on special paper and subsequently pressing.
• Motif size in mm: 2.700 x 2.000 (length x width)
• In principle we recommend the sampling of your designs. When they are pressed as Thermopal individual samples you are able to see if the reproduction meets your requirements. On samples we comply with your colour proofs or colour values that are based on popular colour systems such as Pantone or RAL.

Downloads

Chemical resistance of HPL

110.51 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

Individual Chipboard Composite type P2

Certificates

Certificate of compliance: Proove of food harmless

1.08 MB | Download

Individual Chipboard Composite type P2

Processing

• Can be worked with carbide tipped tools on conventional woodworking machines.

Edging

• Thick and thin edges are suitable.
• EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
• Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage and handling

• On all level surfaces (e.g. pallets), in dry, vented rooms.

Disposal

• We recommend material recycling or energy recovery.

Downloads

General working recommendations for edging materials made from thermosetting resins

2.17 MB | Download