Furniture-Linoleum MDF Composite, double sided Linoleum

Furniture-Linoleum composite element faced on one side with 2 mm Furniture-Linoleum, reverse side with 0.8 mm HPL. Furniture-Linoleum is made from the following renewable materials: flax oil, resin, wood dust and pigments.

Field of application

• Desk tops, tables and shelving units, cabinet fronts, shelves, inside doors, partition walls, wall panelling.
  The use of Furniture Linoleum as kitchen worktops, dining tables, counters and desks or similar is only possible in a limited way because of the mechanical and thermical use.

Furniture-Linoleum MDF Composite, double sided Linoleum

Core material

• MDF
• Medium-density fibreboard with a homogeneous construction.

Density (depending on thickness)

• 750 kg/m³ — 780 kg/m³ ± 10 % (EN 323)

Reaction to fire

• not classified

Cleaning and care

• Any type of stains must be removed immediately. Slight soiling shall be removed with a moist cloth and a neutral/intensive cleaner. Always use only soft cleaning cloths even on stubborn dirt. The surface must be cleaned with a clean cleaning cloth afterwards. Do not use solvents or harsh cleaning agents!
• After laying: Remove fingerprints and spots of unhardened glue immediately with a damp cloth. Hardened spots of glue can be removed with turpentine substitute.

Product safety

• This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.

Special

• Furniture-Linoleum ist made from the renewable materials: flax oil, resin, wood dust and pigments.
• Matching ABS edging for the Furniture-Linoleum surface in design L1200 is available.
• Finish protected with a PU acrylate layer.
• Material from different colour charges can have different colouring since it is natural material. Especially light designs can have so called dry chamber film. However, this film will disappear when disposed to light.
• Other designs on request.

Downloads

Care instructions Furniture-Linoleum

107.95 kB | Download

Furniture-Linoleum MDF Composite, double sided Linoleum

Furniture-Linoleum MDF Composite, double sided Linoleum

Processing

• Processing with protective foil is recommended. Dirt inclusions as well as heavy or sharp objects can leave pressure marks on the surface.
• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.

Edging

• The use of thick edges is recommended.
• Matching ABS edging for the Furniture-Linoleum surface in design L1200 is available.

Fitting technology

• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Storage and handling

• On all level surfaces (e.g. pallets), in dry, vented rooms.

Disposal

• We recommend material recycling or energy recovery.