Chemical resistance of HPL
MDF Composite type F
Composite board made from a medium density fibre board with a homogeneous structure and fire retardant properties, glued both sides with 0.8 mm HPL type F and/or metallic HPL type F. The edges are profilable.
Field of application
- Wherever a higher demand in fire protection - fire retardant - and the edge quality - millable and paintable - is needed. For furniture doors, table tops, etc., for the furniture industry, shop and interior fitting.
MDF Composite type F
| Sizes in mm | Thickness in mm | Textures | |
|---|---|---|---|
| Length | Width | ||
| 2,750 | 2,020 | 17.6 | 20.6 |
Top: 01 |
04 |
06 |
07 |
21 |
22 |
23 |
40 |
47 |
49 |
72
|
Composite board made from a medium density fibre board with a homogeneous structure and fire retardant properties, glued both sides with 0.8 mm HPL type F and/or metallic HPL type F. The edges are profilable.
Core material
- Fire-retardant MDF
- Medium-density fibreboard with a homogeneous construction. Fire-retardant according to EN 13501-1. / Medium-density fibreboard with a homogeneous construction. Fire-retardant according to EN 13501-1.
Density (depending on thickness)
- 780 kg/m³ ± 10 % (EN 323)
Reaction to fire
- fire-retardant
- B-s2,d0 (EN 13501-1)
EC scope
- EN 438-7
Formaldehyde emission class
- E1 (EN 120)
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".
Product safety
- The surface is physiologically safe, and approved for direct contact with food.
- The material is not rated as hazardous material.
- This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
Special
- Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
- It is recommended to order overlay for horizontal, heavy used surfaces in combination with metallic designs. Slight visual difference to the surface is possible without the overlay.
Downloads
MDF Composite type F
Certificates
MDF Composite type F
Processing
- Can be worked with carbide tipped tools on conventional woodworking machines.
Edging
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
- All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage and handling
- On all level surfaces (e.g. pallets), in dry, vented rooms.
Disposal
- We recommend energy recovery.
Downloads
General working recommendations for edging materials made from thermosetting resins
2.17 MB | Download
