Chemical resistance of HPL
Chipboard Composite type F
Fire-retardant composite board, made from a three layer chipboard. Both sides faced with 0.8 mm HPL type F or Metallic HPL type F.
Field of application
- Fire prevention in decorative interior fitting. For wall panels and furniture, in industrial and administrative buildings, schools, sports and concert halls, cinemas, discotheques, hotels, hospitals, residential homes for the aged.
Chipboard Composite type F
| Sizes in mm | Thickness in mm | Textures | |
|---|---|---|---|
| Length | Width | ||
| 2,750 | 2,020 | 11.6 | 17.6 | 20.6 | 23.6 | 26.6 |
Top: 01 |
04 |
06 |
07 |
21 |
22 |
23 |
40 |
47 |
49 |
72
|
| 5,500 | 2,020 | 11.6 | 17.6 | 20.6 | 23.6 | 26.6 |
Top: 01 |
04 |
06 |
21 |
22 |
23 |
40 |
47 |
49 |
72
|
Fire-retardant composite board, made from a three layer chipboard. Both sides faced with 0.8 mm HPL type F or Metallic HPL type F.
Core material
- Fire-retardant chipboard type P2
- Chipboard with fine particle surface, type P2 according to EN 312, in fire retardant quality
Density (depending on thickness)
- 700 kg/m³ — 765 kg/m³ ± 10 % (EN 323)
Reaction to fire
- fire-retardant
- C-s2,d0 (EN 13501-1)
EC scope
- EN 438-7
Formaldehyde emission class
- E1 (EN 120)
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".
Product safety
- The surface is physiologically safe, and approved for direct contact with food.
- The material is not rated as hazardous material.
- This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
Special
- Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
- It is recommended to order overlay for horizontal, heavy used surfaces in combination with metallic designs. Slight visual difference to the surface is possible without the overlay.
- The flame-retardant properties are produced by halogeneous free flame-retardant additives.
Downloads
Chipboard Composite type F
Certificates
Chipboard Composite type F
Processing
- Can be worked with carbide tipped tools on conventional woodworking machines.
- The fire-retardant additives and colourants contained in the support can create deposits on tools and therefore reduce their durability.
- The adhesion of glues can be reduced in exceptional cases.
Edging
- Thick and thin edges are suitable.
- EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
- All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
Storage and handling
- On all level surfaces (e.g. pallets), in dry, vented rooms.
- Protect from moisture and wet conditions.
Disposal
- We recommend energy recovery.
Downloads
General working recommendations for edging materials made from thermosetting resins
2.17 MB | Download
