Technical details
ESA HPL type P
Electrostatically conductive, decorative high pressure laminate in postforming quality with black core.
Made of several impregnated cellulose layers and melamine impregnated decor paper which are pressed together under pressure and heat. The back side is sanded for gluing.
Field of application
- Wherever electrostatic charge needs to be prevented, the products out of our ESA systeam are essential. In workplaces, in microelectronics, laboratories and control centres.
ESA HPL type P
| Sizes in mm | Thickness in mm | Textures | |
|---|---|---|---|
| Length | Width | ||
| 5,500 | 2,020 | 0.6 | 0.8 | 47 | 49 |
| 2,750 | 2,020 | 0.6 | 0.8 | 47 | 49 |
Reaction to fire
- normally inflammable
Formaldehyde emission class
- E1 (EN 717-1)
Volume resistance RD
- 1 x 104– 1 x 109 Ohm (EN 61340-5-1)
- measured dry, measurement voltage 100 V DC, cylindrical electrode, 20-30 °C and 20-50% rel. humidity (96 h conditioning)
Chemical resistance
- Resistant to organic solvents, weak acids, petrol and oil.
Cleaning and care
- The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the recommendations in the data sheet "Cleaning of HPL surfaces".
- The impact of water and cleaning agents should be limited to a short time period, drop quantities and standing water should be avoided. Please wipe the surface with a fluff free cloth allover and efficient dry.
Product safety
- This product is following the REACH regulation EG 1907/2006 an article. Following Article 7 it needs not to be registered.
Special
- Available in the designs Span 140, U016, U043, U133, U154.
- Please observe the information contained in the technical data sheet "Electrostatic discharge capacity of decorative laminates (HPL)".
Downloads
ESA HPL type P
ESA HPL type P
Processing
- Please respect the recommendations of the GKV trade associaton for the processing of high pressure laminates.
- For the production of composite elements we recommend a symmetric construction. This means both sides identical HPL. If backing material (also HPL) is used, there is a risk of shape distortion (bowing). Tests will be necessary.
Installation and assembly
- Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
- Please consider during construction and fitting that in ESD protection zones (EPA) the ESD work stations have to be earthed (same electrostatic potential of all elements). This can be achieved construcionally via a connection of the conductive elements of one EPA with an EPA-earth.
- Conductive materials which are fitted insulating are rechargable and therefore a risk potential.
- Please ensure that the material is processed and fitted correctly and using the best available technology.
- Please contact your ESD consultant or use corresponding technical literature for further information and concrete realisation instructions.
Storage and handling
- On all level surfaces (e.g. pallets), in dry, vented rooms.
Disposal
- Energy recovery is recommended.
