Span-UB type P2 fire-retardant

Fire-retardant melamine faced chipboard with a fine particle surface chipboard type P2, faced in single paper construction.

Field of application

• Preventive fire protection for the decorative sector. In the interior fitting for wall and ceiling cladding, installations, partitions and furniture in industry and administration buildings, schools, sport - and festival halls, hotels and care institutions.

Span-UB type P2 fire-retardant

Fire-retardant melamine faced chipboard with a fine particle surface chipboard type P2, faced in single paper construction.

Product standard

• EN 14322

Core material

• Fire-retardant chipboard type P2
• Chipboard with fine particle surface, type P2 according to EN 312, in fire retardant quality

Density (depending on thickness)

• 700 kg/m³ — 765 kg/m³ (EN 323)

Reaction to fire

• fire-retardant
• 10 mm: C-s2,d0 (EN 13501-1)
• 16 mm — 25 mm: B-s2,d0 (EN 13501-1)

Formaldehyde emission class

• E1 (EN 120)

Chemical resistance

• Resistant to organic solvents, weak acids, petrol and oil

Cleaning and care

• The surface can be cleaned with water and gentle cleaning agents. To remove stubborn stains, please observe the GKV trade association recommendations in the data sheet "Cleaning of HPL surfaces".

Product safety

• The surface is physiologically safe, and approved for direct contact with food.
• The decorative coating consists of printed or dyed décor papers. They are saturated in the duroplast melamine-formaldehyde resin, which then hardens during the laminating process to form a highly resistant, non-reactive material.
• The material is not rated as hazardous material.

Special

• Slight colour differences to HPL without overlay and to melamine faced boards are possible on wood and stone reproductions, as well as on fantasy designs.
• If printed designs are required for horizontal applications it is recommended that an overlay is ordered. The colour may differ slightly from HPL without overlay and melamine faced board.
• The flame-retardant properties are produced by halogeneous free flame-retardant additives.
• All stated technical values apply only in moderate climate zones (temperature, humidity, incident light radiation).

Downloads

Technical details

36.83 kB | Download

Cleaning of HPL surfaces

74.03 kB | Download

Span-UB type P2 fire-retardant

Certificates

Classification Report EN 13501-1 (thickness: 10 - 16 mm)

573.64 kB | Download

Classification Report EN 13501-1 (thickness: min. 16 mm)

574.80 kB | Download

Span-UB type P2 fire-retardant

Can be worked with carbide tipped tools on conventional woodworking machines.
The fire-retardant additives and colourants contained in the support can create deposits on tools and therefore reduce their durability.
The adhesion of glues can be reduced in exceptional cases.

Edging

• Thick and thin edges are suitable.
• EVA and PUR hotmelts are recommended for edge adhesion.

Fitting technology

• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.

Installation and assembly

• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be air-conditioned according to future use.
• Please ensure that the material is processed and fitted correctly and using the best available technology.

Storage

• On all level surfaces (e.g. pallets), in dry, vented rooms.
• Protect from moisture and wet conditions.

Disposal

• Energy recovery is recommended.