Decorative high pressure laminate in standard quality of classification HGS / VGS acc. to EN 438-3.
Made of several impregnated cellulose layers and melamine impregnated decor papers which are pressed together under pressure and heat. The back side is sanded for gluing.
Note
PRODUCTS
FAST DELIVERY PROGRAMME
ACCESSORIES
DESIGNERS' COLLECTION
SALES PARTNERS
DST
NEWSLETTER
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Innovations
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
U088 Rasul
NCS 5010 - Y10R
NCS 5010 - Y10R
Product choice
Wood products
Decorative high pressure laminate in postforming quality of classification HGP / VGP acc. to EN 438-3.
Made of several impregnated cellulose layers and melamine impregnated decor papers which are pressed together under pressure and heat. The back side is sanded for gluing.
Made of several impregnated cellulose layers and melamine impregnated decor papers which are pressed together under pressure and heat. The back side is sanded for gluing.
High pressure compact laminate in standard quality and the classification CGS acc. to EN 438-4.
With black core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
With black core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
High pressure compact laminate in standard quality and the classification CGS acc. to EN 438-4.
With brown core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
With brown core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
Melamine faced chipboard with a fine particle surface chipboard type P2, faced in single or double paper construction.
Direct coated chipboard with a fine particle surface chipboard, one side with anti-slip facing, back side melamine faced.
Melamine faced wood chipboard, both sides decorative faced in single- or double paper construction. Because of the absolutely minimised formaldehyde content the limit values of the Blue Angel, EPF- as well as CARB2 standards are respected with this board without any problems.
Melamine faced, moisture-resistant chipboard with a fine particle surface chipboard type P5, faced in single or double paper construction.
Melamine faced high density fibre board, decorative surface on both sides with a single paper construction.
The core board is smooth on both sides with a homogeneous structure.
The core board is smooth on both sides with a homogeneous structure.
Decorative coated medium density fibre board with a homogeneous structure, both sides melamine faced with a single or double paper construction. The edges are profilable.
Black coloured, decorative coated medium density fibre board with a homogeneous structure, both sides melamine faced with a single or double paper construction. The edges are profilable.
Decorative faced blockboard with high bending strength, both sides melamine faced with a single or double paper construction.
Core layer made of urea glue bonded blockboard (IF 20 according to DIN 68705), faced with a thin particle board.
Core layer made of urea glue bonded blockboard (IF 20 according to DIN 68705), faced with a thin particle board.
High quality composite with unique surface quietness. Consisting of a wood particle board type P2, both side faced with 1.2 mm HPL respectively metallic HPL.
Composite board made up from a chipboard core with fine particle surface type P2, glued both sides with 0.8 mm HPL and/or metallic HPL.
Composite board made from a wood chibboard, both sides faced with 0,8 mm HPL or Metallic HPL. Because of the absolutely minimised formaldehyde content the limit values of the Blue Angel, EPF- as well as CARB2 standards are respected with this board without any problems.
Composite board made up from a moisture resistant chip board with fine particle surface type P5, glued both sides with 0.8 mm HPL and/or metallic HPL.
Composite board made up from a light weight chipboard, glued both sides with 0.8 mm HPL and/or metallic HPL.
Composite board made from a hemp fibre board for highest requirements in eco-balance and sustainability, both sides faced with 0.8 mm HPL or Metallic HPL.
Composite board made from a medium density fibre board with a homogeneous structure (MDF), glued both sides with 0.8 mm HPL and/or metallic HPL. The edges are profilable
Composite board made from a black coloured medium density fibre board with a homogeneous structure (MDF), glued on both sides with 0.8 mm HPL and/or metallic HPL. The edges are profilable.
Poplar plywood AW100 board, glued on both sides with 0.8 mm HPL and/or metallic HPL. For maximum moisture resistance, bending strength and durability.
Birch multiplex AW100 board, glued on both sides with min. 0.8 mm HPL and/or metallic HPL. For maximum moisture resistance, bending strength and durability.
Blockboard, glued on both sides with 0.8 mm HPL and/or metallic HPL. For high demand in bending strength.
Core layer made from a urea glue bonded blockboard (IF 20 according to DIN 68705), faced with a thin particle board.
Core layer made from a urea glue bonded blockboard (IF 20 according to DIN 68705), faced with a thin particle board.
High quality composite with unique surface quietness. Made from a wood particle board type P2, glued with high gloss HPL type P 0.6 mm. Reverse side in texture 47. The front and rear edge are profiled with radius 3 mm.
HPL composite board made of wood chipboard type P2 according to EN 312, glued on both sides with HPL type P 0.6 mm. The front and rear edge are profiled with a 3 mm radius.
HPL composite board made of wood chipboard type P2 according to EN 312, glued on both sides with HPL type P 0.6 mm. The front and rear edge are profiled with a 4 mm radius.
HPL composite board made of wood chipboard type P2 according to EN 312, glued on both sides with HPL type P 0.6 mm. The front and rear edge are profiled with a 6 mm radius.
HPL composite board made of wood chipboard type P2 according to EN 312, glued on both sides with HPL type P 0.6 mm. The front and rear edge are profiled with a 8 mm radius.
HPL composite board made of wood chipboard type P2 according to EN 312, glued on both sides with HPL type P 0.6 mm. The front and rear edge are profiled with a 10 mm radius.
Fire protection
Decorative high pressure laminate in flame retardant quality of classification HGF / VGF acc. to EN 438-3.
Made of several impregnated cellulose layers and melamine impregnated decor papers which are pressed together under pressure and heat. The back side is sanded for glueing.
Made of several impregnated cellulose layers and melamine impregnated decor papers which are pressed together under pressure and heat. The back side is sanded for glueing.
High pressure compact laminate in flame retardant quality and in classification CGF acc. to EN 438-4.
With black core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
With black core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
High pressure compact laminate in flame retardant quality and in classification CGF acc. to EN 438-4.
With brown core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
With brown core of several impregnated cellulose layers and melamine impregnated decorative surface on both sides.
Fire-retardant melamine faced chipboard with a fine particle surface chipboard type P2, faced in single or double paper construction.
Decorative faced medium density fibre board with a homogeneous structure and fire retardant properties, both sides melamine faced with a single or double paper construction. The edges are profilable.
Fire-retardant composite board, made from a three layer chipboard. Both sides faced with 0.8 mm HPL type F or Metallic HPL type F.
Composite board made from a medium density fibre board with a homogeneous structure and fire retardant properties, glued both sides with 0.8 mm HPL type F and/or metallic HPL type F. The edges are profilable.
Decorative interior fitting board, made from a non-combustible vermiculite, faced on both sides with 0.8 mm or 1.2 mm HPL type F or Metallic HPL type F.
Marine products
Decorative high pressure laminate according to EN 438-3 with the IMO classification 'Low Flame-Spread Surface Material'.
Made of several impregnated cellulose layers and melamine impregnated decor papers which are pressed together under pressure and heat. The back side is sanded for gluing.
Made of several impregnated cellulose layers and melamine impregnated decor papers which are pressed together under pressure and heat. The back side is sanded for gluing.
Decorative interior fitting board, made from non-combustible vermiculite, faced on both sides with 0.8 mm or 1.2 mm Marine HPL or Marine Metallic HPL.
Magnetic boards
Decorative magnetic high-pressure laminate.
The back side is sanded for gluing.
The back side is sanded for gluing.
Decorative magnetic composite HPL board with 1.2 mm Magnet HPL on both sides.
Light construction
Weight reduced chipboard made from wood and fast renewable annuals for highest requirements in eco-balance and sustainability, both sides decorative melamine faced in double paper construction.
Decorative non-locking light weight construction board with a SWAP paper honeycomb core, both sides faced with a 3,2mm HDF deck and mealmine faced in a two paper construction.
Composite board made up from a light weight chipboard, glued both sides with 0.8 mm HPL and/or metallic HPL.
Weight reduced chipboard made from wood and resources gentle annuals for highest requirements in eco-balance and sustainability, both sides faced with robust 0.8 mm HPL or Metallic HPL.
Poplar plywood AW100 board, glued on both sides with 0.8 mm HPL and/or metallic HPL. For maximum moisture resistance, bending strength and durability.
Ultra light plywood board, glued on both sides with 0.8 mm HPL and/or metallic HPL. For high demand in bending strength. Middle layer made of Albasia.
Decorative paper honeycomb board, faced on both sides with a 3.2 mm HDF board. Glued on both sides with 0.8 mm HPL and/or metallic HPL. Thanks to the HDF facing, common fitting and connection techniques can be used for this lightweight board with paper honeycomb core (SWAP). This board can also be cut without restrictions and can be processed on conventional edging machines.
Edgings
3 layer endless edging made of melamine-resin impregnated decorative paper on a special flexible core with hot-melt adhesive to meet the most discerning demands.
Melamine edges are durable, dirt-repellent, chemically resistant universal edging.
Melamine edges are durable, dirt-repellent, chemically resistant universal edging.
3 layer endless edging made of melamine-resin impregnated decorative paper on a special flexible core to meet the most discerning demands.
Melamine edges are durable, dirt-repellent, chemically resistant universal edging.
Melamine edges are durable, dirt-repellent, chemically resistant universal edging.
2 mm thick endless ABS edging (acrylonitrile butadiene styrene).
ABS is an impact-resistant, high-grade thermoplastic, capable of withstanding mechanical and thermal stresses, with outstanding use, application and waste-disposal properties.
ABS is an impact-resistant, high-grade thermoplastic, capable of withstanding mechanical and thermal stresses, with outstanding use, application and waste-disposal properties.